Independent Intelligence for Battery Storage

Clir Renewables delivers AI-powered investor grade reporting, contractual availability reconciliation, degradation monitoring and warranty claim support for BESS. Built on the analytical rigor behind 350+ GW of BESS, solar and wind globally.

Why BESS Owners Can’t Connect OEM, Meter and Warranty Data

Availability comes from the OEM. Throughput comes from the meter. The warranty was signed years before either produced a data point. Connecting them is the owner's problem, and today it gets done by hand or not at all.

Meter throughput says nothing about efficiency loss. The warranty sits in a drawer until a claim is needed, by which point the performance record is incomplete or held by the OEM. Degradation stays invisible until alarms fire or something fails. And if the battery shares a site with wind or solar, the reporting fragments across systems that were never designed to agree.

Every quarter this stays unresolved, the evidence chain for warranty claims, PPA reconciliation and investor reporting gets weaker. Clir provides the AI intelligence layer between the asset and the investor to solve this problem.

What BESS Owners Get From Clir’s AI Platform

Health intelligence independent of the OEM. Every KPI calculated from source SCADA and BMS data instead of vendor summaries.
A warranty evidence chain that builds itself. Commissioning baseline through claim submission, replacing manual independent-engineer prep.
Contract breaches flagged automatically. Daily PPA availability vs budget with automatic alerts.
One record across BESS, wind and solar. Every asset benchmarked on 350+ GW of operational data.

Investor Grade Portfolio Reporting for BESS

Dashboards and reporting surface BESS standalone or alongside wind and solar, with energy, availability and revenue quantified and tied to specific issues. Ask your AI assistant directly why a project is or isn't meeting budget.

Clir BESS Page 2

Budget vs discharge energy, availability, RTE, SOC and cycle counts across assets, plus PPA availability trending.

BESS Performance and Degradation Monitoring

Real-time KPI dashboards, temperature trending, degradation modelling, heatmaps and configurable alerting. RTE, SOC and availability are trended continuously so deviations are caught before alarms fire.

Clir BESS Page 3

Cell temperature trended across arrays within the BESS, with one array visibly diverging from the rest.

Contractual Availability Reconciliation for BESS

Independent availability tracking that does not rely on OEM reporting. Forensic reconciliation surfaces discrepancies between Clir-calculated and operator-reported availability, with dispute-ready evidence generation. Daily PPA availability is tracked against budget with automatic breach flags.

Clir BESS Page 4

Daily analytics track PPA availability against the contractual budget.

BESS Warranty Claim Support

A structured evidence chain for OEM warranty submission: commissioning baseline, warranted curve vs actual RTE, operator-cause exclusion and availability loss quantification. Replaces manual independent engineer preparation, with annual state of health (SOH) and remaining useful life (RUL) projections feeding valuation, refinancing and M&A.

Clir BESS Page 5

Round-trip efficiency trended month over month across the system.

BESS Analytics From Real-Time to Annual

Real-time and daily: Dispatch state and idle detection, bank online count alerts, daily PPA availability vs budget and discharge cycle logging.
Weekly: 7-day rolling RTE trend, bank health matrix, temperature divergence and SOC boundary compliance.
Monthly: Primary RTE vs contractual thresholds, full PPA availability reconciliation and dispatch compliance rate.
Annual: Full SOH and RUL projection, PPA compliance and RTE vs warranty, degradation rate benchmarking and availability loss quantification.

If a KPI exists in the SCADA or BMS feed, Clir normalizes it: SOC, RTE, charge and discharge energy, auxiliary consumption, bank temperatures, banks online, remaining capacity, PPA availability vs budget, cumulative discharge cycles and dispatchable power.

BESS Data Access: Report Builder, API and MCP

Customizable report builder with PDF, CSV and Excel export. Full API access to raw SCADA and processed KPIs for integration with Databricks, Power BI and direct database connections. And for teams deploying corporate AI, the Clir MCP connector makes the processed BESS dataset available to Claude, Microsoft Copilot or other LLM environments, so your team can ask performance, warranty and contractual questions in plain language without pointing a general-purpose model at raw SCADA.

One Portfolio View Across BESS, Solar and Wind

BESS, solar and wind assets onboard into a single portfolio view. For co-located solar-plus-storage, wind-plus-storage or hybrid sites, this eliminates the reporting fragmentation that makes portfolio-level decisions slow and prone to errors.

One reporting workflow across wind, solar and storage, from flash reports to annual reviews.